HOLD DOWN STRAPS FOR PROTECTED STEEL UNDERGROUND STORAGE TANKS

CAN/ULC-S603.1

Please click Part Number to submit an inquiry

Part Number Capacity (litres) Inside Diameter  Inside Length  Straps Per Tank Strap Location Anchor Bolt Size Strap Size
L M N  P
990040 2270 1270 1800 2 420 ---- ---- ---- 25.4 3 x 76
990040 4540 1270 3590 2 420 ---- ---- ---- 25.4 3 x 76
990050 9000 1830 3430 2 420 ---- ---- ---- 25.4 6 x 76
990055 10000 2000 3190 2 420 ---- ---- ---- 25.4 6 x 76
990050 13600 1830 5180 2 575 ---- ---- ---- 25.4 6 x 76
990065 15000 2500 3060 2 635 ---- ---- ---- 25.4 6 x 76
990070 22700 2130 6380 4 575 1200 ---- ---- 25.4 6 x 76
990065 25000 2500 5100 4 420 1355 ---- ---- 25.4 6 x 76
990065 35000 2500 7140 4 575 2000 ---- ---- 25.4 6 x 76
990085 45400 2740 7700 4 575 2100 ---- ---- 25.4 6 x 76
990090 50000 3000 7080 4 575 2000 ---- ---- 25.4 6 x 76
990065 50000 2500 10190 4 575 3000 ---- ---- 25.4 6 x 76
990095 75000 3600 7370 6 575 1060 1200 ---- 25.4 6 x 76
990099 100000 3600 9830 8 575 1200 1200 1200 25.4 6 x 76
All sizes quoted in millimeters (mm) unless otherwise noted

NOTE:
  • For 2270 L and 4540 L tanks, only one piece per strap
  • 3 mm x 100 mm neoprene pad is recommended between hold down strap and tank
SPECIFICATIONS:
  • Band: quality carbon steel with a minimum yield strength of 200 Mpa.
  • Anchor bolt: Carbon steel G40.21-44W
  • Neoprene pad: Black neoprene rubber

SUMP RISER AND SLEEVE/COVER ASSEMBLY

     

SUBMERSIBLE PUMP BOXES

SPECIFICATIONS:
  • Material: Carbon steel angle iron construction
  • Standard size 30" square or 40" square
  • All submersible pump boxes equipped with (8) 1/2" diameter x 6" long anchor bars
  • 40" submersible pump box with two more ribs on cover
  • All submersible pump boxes treated with one coat red oxide primer
  • Special submersible pump box of any size available on request

MANHOLE AND REINFORCING PLATE

SPECIFICATIONS:
  • Material: Steel Plate ASTM A283 Grade C or equal
  • Coating to same specification as tank
  • Note: Reinforcing plates are required for manholes on tanks greater than 50,000 litres capacity

TELESCOPIC SLEEVE (With Dielectric Isolation)

SPECIFICATIONS:
  • Material: Carbon steel angle iron reinforced flanged cover
  • Carbon steel angle iron frame
  • Carbon steel upper sleeve
  • Plastic lower sleeve
  • For traffic area: Interior and exterior surfaces of cover and upper sleeve to becoated with black asphalt paint